Reports To: Lead man
Summary:
Entry-level position responsible for assembling industrial equipment with immediate supervision.
Preferred Education/Experience:
- High school diploma or equivalent preferred and/or training
- Some knowledge of A.N.S.I. ratings, flange, bolts and gasket sizes
Physical Strain:
- Standard requirements - Bending, squatting, climbing, stooping, twisting, reaching, working at elevated heights will all be required
- Lifting up to 50 pounds maximum with frequent lifting and/or carrying of objects weighing up to 25 pounds
- Must be able to work outside in extreme temperatures or in a shop environment
Benefits:
An extensive benefits package is offered upon meeting eligibility period.
Technical Skills
• Assists with preparing, setting and leveling skids and piping.
• Utilizes working knowledge of different types of major components and piping.
• Follows all HSE guidelines.
• Utilizes basic knowledge of threading equipment.
• Assists with hanging bottles, installing weld pipe, and vessels.
• Experience with chop saw, band saw, drills, thread machines, etc.
• Run screw pipe with some supervision
• Read tape measure
• Knowledge of basic tools
• Must be able to work with the team in developing improved work processes for the department
Reports To: Lead man
Summary:
Intermediate position responsible for the safe and quality assembling of industrial and production equipment with moderate supervision.
Preferred Education/Experience:
- High school diploma or equivalent preferred and/or training
- Vocational or technical education a plus
- Minimum two (2) years industrial experience
Physical Strain:
- Standard requirements - Bending, squatting, climbing, stooping, twisting, reaching, working at elevated heights will all be required
- Lifting up to 50 pounds maximum with frequent lifting and/or carrying of objects weighing up to 25 pounds
- Must be able to work outside in extreme temperatures or in a shop environment
An extensive benefits package is offered upon meeting eligibility period.
Technical Skills
Assists with preparing, setting and leveling of skids, vessels, welded, and threaded piping to complete assembly of various types of production equipment.
Utilizes working knowledge of different types of major components and valves.
Follows all HSE guidelines
Some knowledge of A.N.S.I. ratings, flange, bolts and gasket sizes
Understands basic blueprints and isometric drawings with moderate supervision
Utilizes basic knowledge of the hydro static testing equipment
Must be able to hang bottles, install welded pipe, make supports and braces, air test system, set scrubbers and install pumps
Must be able to work with the team in developing improved work processes for the department
Reports To: Piping Lead
Summary:Position responsible for the working supervision of complete fabrication of any and all piping systems needed for various types of production equipment in a safe, efficient and quality focused manner.
Preferred Education/Experience:
- High school diploma or equivalent preferred and/or training
- Vocational or technical education a plus
- Minimum five (5) years industrial pipe threading and assembly experience
Physical Strain:
- Standard requirements
- Bending, squatting, climbing, stooping, twisting, reaching, working at elevated heights will all be required
- Lifting up to 50 pounds maximum with frequent lifting and/or carrying of objects weighing up to 25 pounds
- Must be able to work outside in extreme temperatures or in a shop environment
An extensive benefits package is offered upon meeting eligibility period.
Technical Skills
• May supervise, train, and/or assist with proper techniques of the assembly of any and all types of piping systems for production equipment packaging.
• Supervise, train and/ or assists with preparing, setting and leveling of skids, vessels, welded, and threaded piping to complete assembly of various types of production equipment.
• Utilizes working knowledge of piping fabrication and installation requirements, geometry, and mathematical skills to train and supervise piping crews.
• Follows, promotes, and, ensures all HSE guidelines are followed
• Understands detailed blueprints and isometric drawings.
• Must be able to work with the team in developing improved work processes for the department
• Must have extensive knowledge in pipe assembly to effectively lead and/or train a group of employees to produce a quality product in a timely fashion.
• Must be able to effectively lead, discipline, and engage employees in good safe work habits
• Minimize waste and inefficiencies of all materials and labor in the pipe department
• Promotes and supports safety, production and positive attitude
Reports To: Drafting Manager
Summary: Under the direction of the drafting manager, the Designer will generate structural, ASME pressure Vessel, and piping drawings per customer specifications using 3-D AutoCAD/Cadworx software.
Requirements:
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Education and/or Experience:
Prefer 3-5 years minimum experience in related industry with working knowledge of AutoCAD in an oil & gas process equipment manufacturing environment.
Language Skills:
Must have the ability to read, analyze, and interpret project specifications, technical documents and related information. Requires the ability to effectively communicate and present information to various employees within the organization.
Computer Skills:
The job requires computer proficiency and the ability to effectively operate 3-D AutoCAD Software. Must be able to effectively and quickly learn new software as required for the position.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Most work will be office related, however while performing the duties of this job, the employee will frequently be required to go into a shop environment and be around vessel and structural fabrication.
Benefits:
An extensive benefits package is offered.
Technical Skills
Handle a range of design work related to the design of complete custom oil & gas process systems and package equipment.
Generates Bills of Material and specifications.
Generation of 3-D models & PID’s, to include identifying and verifying dimensions, curvatures, angles, tolerances and materials.
Generation of Structural drawings to include skids, platforms/ladders, and any applicable supports to include identifying and verifying dimensions, angles, tolerances and materials.
Generation of Piping Isometric drawings to include identifying and verifying dimensions, angles, tolerances and materials.
Will modify drawings and models according to any project modifications
Will collaborate directly with project management and engineering to help meet all of the design needs from start to finish for a project.
Perform special projects or assignments as required and any other duties as assigned.
Reports to: Engineering Manager
Summary:
Under the direction of the Engineering Manager, the Mechanical Engineer will perform and coordinate engineering efforts to meet customer specifications and to resolve engineering problems involved in the design and manufacturing of custom process packages and equipment for a rapidly growing company.
Requirements:
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Education and/or Experience:
Requires a Bachelors (B.S.) Degree in Mechanical Engineering with zero (0) to five (5) years of experience in an Engineering role. Experience with structural analysis and/or experience in the process industry or knowledge of ASME code pressure vessel and/or piping design is a plus, but not required.
Language Skills:
Must have the ability to read, analyze, and interpret engineering specifications, technical documents and related information. Must be able to effectively write reports and correspondence. Requires the ability to effectively communicate and present information and respond to questions from management, customers, vendors, and other employees of the organization.
Computer Skills:
The job requires computer proficiency and the ability to effectively operate MS Office applications such as Outlook, Word, and Excel. Previous experience with RISA 3D or Compress is not required, but is a plus. Must be able to effectively and quickly learn new software as required for the position.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Most work will be office related, however while performing the duties of this job, the employee will frequently be required to go into a shop environment and be around vessel and structural fabrication.
Technical Skills
Essential Duties and Responsibilities:
• Handle a range of mechanical engineering work related to the design of complete custom oil & gas process systems and package equipment.
• Primary job responsibilities will involve design and stress analysis of structural equipment for equipment packages. Design will include sizing and analysis for skid packages, structural framework, lift lugs and other related equipment.
Most structural analysis will be performed using RISA 3D structural analysis software.
• Work will also include frequent design of pressure vessels based upon ASME pressure vessel design and code application. Analysis will be performed using Compress ASME pressure vessel design software.
• Duties may also include sizing and selection of equipment, control valves and instrumentation.
• Will be responsible for creation of data sheets and technical information as needed for project.
• Ensure proper engineering principles and applications are followed and customer specifications are met while ensuring compliance with all in house procedures and all quality and safety regulations.
Technical Skills
• Operates traveling or stationary overhead crane (cab- or ground controlled) to lift, move, and position loads, such as machinery, equipment, products, and solid or bulk materials, using hoisting attachments, such as hook, sling, forks, electromagnet, or bucket.
• Observes load hookup and determines safety of load.
• Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
• Clean, service and maintains all equipment including overhead crane and any other yard machinery used as a hoisting or moving mechanism.
• Inspects crane for defective parts and notifies supervisor or maintenance personnel of defects or malfunctions.
• May attach load to hook or other crane accessory prior to operating crane.
• Oversees and supervises all major lifts and moves in yard and shop.
• Maintains all fuels and gases at the facility including bulk gases for shop operations.
• Notify maintenance personnel or shop manager to order all fuels, gases, or other items needed to complete scope of work.
• Promotes and supports safety, production and positive attitude.
• Minimize waste and inefficiencies of all materials and labor contributing to shop and yard equipment.
Reports To: Leadman
Summary: Intermediate level position that sandblasts, cleans and paints production equipment as directed with moderate supervision.
Skills/Requirements Preferred Education/Experience: High school diploma or equivalent preferred; and one to three years related experience and/or training Physical Strain: Standard requirements. Bending, squatting, climbing, stooping, twisting and reaching will all be required occasionally in this position. Lifting 50 pounds maximum with frequent lifting and/or carrying of objects weighing up to 25 pounds. Must comply with all OSHA regulations regarding paint safety procedures
Technical Skills
Essential Duties & Responsibilities:
Operates cleaning equipment and prepares equipment for painting
Ability to mix specific types of paint systems and applies these to customer and company specifications
Ability to sandblast equipment to customer and company specifications
Masks and feathers old paint in preparation for new paint. Must have knowledge of required tools and maintenance care
Assists with paint compliance logs
Follows all relevant HSE guidelines
Promotes and supports safety, production and positive attitude
Must be able to work with the team in developing improved work processes for the department
Ability to be certified to drive a forklift
Reports To: Lead man
Summary:
To perform safe and quality fabrication of various types of piping spools from Isometric drawing or other means.
Requirements/Education:
- Must be able to tack and use grinder
- High school diploma or equivalent; and one to three years related experience and/or training; or equivalent combination of education and experience
- Experience operating other shop equipment (e.g., overhead crane, hand tools)
- Knowledge of different types and sizes of piping materials
- Must have knowledge of butt weld fittings
Technical Skills
• May layout and mark weld points on parts or subassemblies using rule, square, scribe or templates
• Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools
• Reads blueprints and performs own fit-up
• Works with different types and sizes of piping materials
• Operates cutting equipment
• Safely operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, pipe beveling machine, and various pneumatic hand tools
• Assembly of components with some fabrication of equipment needed for the job with minimal supervision
• Promotes and supports safety, production and positive attitude
• Ability to fit weld pipe or butt weld pipe
• Primarily fabricates piping and associated brackets to all drawings provided
• Safely operates cutting torch and various power and hand tools
Reports To: Lead man
Summary:
To perform safe and quality welds of various types of pipe spools with any and all processes utilized from a pinwheel roller or in fixed position.
Requirements:
- Must pass a 6G welding test for tacking vessels and pipe
- Structural discipline must pass a 3G welding test
- Must be able to tack and use grinder
- High school diploma or equivalent; and one to three years related experience and/or training; or equivalent combination of education and experience
- Experience operating other shop equipment (e.g., overhead crane, hand tools, and pinwheel)
- Knowledge of different types and sizes of piping materials
- Must have knowledge of butt weld fittings
Technical Skills
May layout and mark weld points on parts or subassemblies using rule, square, scribe or templates
Positions pieces to be welded into jigs, holding fixtures, guides and pinwheel using hand tools
Safely operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, cutting torch and various power and hand tools
Assembly of components with some fabrication of equipment needed for the job with minimal supervision
Promotes and supports safety, production and positive attitude
Primarily weld pipe spools in fixed position or roll out in pinwheel
Reports To: Lead man
Summary:
To perform safe and quality fabrication of various types of structural members.
Requirements:
- Ability to read, write, speak and understand basic English
- Working knowledge of relevant HSE
Preferred Education/Experience:
- High school diploma or equivalent or equivalent combination of education and experience
- Minimum one to twelve months related experience and/or training
- Welding school or on the job training
- Knowledge of different types and sizes of structural materials
Physical Strain:
- Standard requirements. Bending, squatting, climbing, stooping, twisting and reaching will all be required occasionally in this position
- Lifting 50 pounds maximum with frequent lifting and/or carrying up to 25 pounds
Technical Skills
• Uses mig and/or flux core process to tack skids, braces, and misc. structural members
• Ability to pass applicable fitters test(s)
• May weld brackets and braces and use grinders. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools.
• Must be able to operates basic cutting, drilling, and hole punching equipment
• Promotes and supports safety, production and positive attitude
• Must be able to work with the team in developing improved work processes for the department
• Must be able to read structural blue prints
• Must be able to perform mathematical formulas to calculate cut lengths of structural members
Reports To: Shop Manager
Summary:
Position responsible for the working supervision of complete fabrication of any and all structural components needed for various types of production equipment in a safe, efficient and quality focused manner.
Preferred Education/Experience:
• - High school diploma or equivalent preferred and/or training
• - Vocational or technical education a plus
• - Minimum five (5) years structural fabrication experience
Physical Strain:
• - Standard requirements - Bending, squatting, climbing, stooping, twisting, reaching, working at elevated heights will all be required
• - Lifting up to 50 pounds maximum with frequent lifting and/or carrying of objects weighing up to 25 pounds
• - Must be able to work outside in extreme temperatures or in a shop environment
Technical Skills
• May supervise, train, and/or assist with proper techniques of fitting and welding of any and all types of structural components for production equipment packaging.
• Utilizes working knowledge of structural fabrication and component requirements, geometry, and mathematical skills to train and supervise fabrication crews.
• Follows, promotes, and, ensures all HSE guidelines are followed
• Understands detailed blueprints drawings.
• Must be able to work with the team in developing improved work processes for the department
• Must have extensive knowledge in structural fabrication to effectively lead and/or train a group of employees to produce a quality product in a timely fashion.
• Must be able to effectively lead, discipline, and engage employees in good safe work habits
• Minimize waste and inefficiencies of all materials and labor in the structural department
• Promotes and supports safety, production and positive attitude
Reports To: Lead man
Summary:
To perform safe and quality welds of various types of structural members.
Requirements:
- May be required to pass 2G or 3G test for structural
- Ability to read, write, speak and understand basic English
- Working knowledge of relevant HSE
Preferred Education/Experience:
- High school diploma or equivalent or equivalent combination of education and experience
- Minimum one (1) year related experience and/or training
- Welding school or on the job training
- Knowledge of different types and sizes of structural materials
Physical Strain:
- Standard requirements. Bending, squatting, climbing, stooping, twisting and reaching will all be required occasionally in this position
- Lifting 50 pounds maximum with frequent lifting and/or carrying up to25 pounds
Technical Skills
Uses metal core mig, flux core or stick welding process (preference pass two)
Ability to pass applicable test(s) and applicable Non Destructive Exam
May weld brackets and braces and use grinders. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May perform position welds on code material
Must be able to operates basic cutting equipment
Promotes and supports safety, production and positive attitude
Must be able to work with the team in developing improved work processes for the department
Reports to: Lead man
Summary:
To perform safe and quality fabrication of various types of ASME coded vessels.
Requirements:
- Vessel discipline must pass a 3G welding test
- Must be able to tack and use a grinder
- High school diploma or equivalent; and one to three years related experience and/or training; or equivalent combination of education and experience
- Experience operating other shop equipment (e.g., overhead crane, hand tools)
- Knowledge of different types and sizes of vessel materials
Technical Skills
• May layout and mark weld points on parts or subassemblies using rule, square, scribe or templates
• Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools
• Reads blueprints and performs own fit-up
• Works with different types and sizes of vessel materials
• Operates cutting equipment
• Safely operates iron worker, grinders, overhead cranes, rigging, pipe threading machine, welding machine, and various pneumatic hand tools
• Assembly of components with some fabrication of equipment needed for the job with minimal supervision
• Promotes and supports safety, production and positive attitude
• Primarily fabricates coded pressure vessels to all drawings provided
• Primarily fabricates and/or assemble external and internal components to assist in and/or fabricate coded pressure vessels.
• Primarily operates cutting torch and various power and hand tools
Reports to: Lead man
Summary:
To perform safe and quality fabrication of various types of ASME coded vessels.
Requirements:
- Vessel discipline must pass a 3G welding test
- Must be able to tack and use grinder
- High school diploma or equivalent; and one to three years related experience and/or training; or equivalent combination of education and experience
- Experience operating other shop equipment (e.g., overhead crane, hand tools)
- Knowledge of different types and sizes of vessel materials
- Must have knowledge of blue print and coded pressure vessels
Technical Skills
• Weld short arc, flux core, and sub arc processes.
• Carbon arc gouge to be able to achieve 100% UT and or x-ray quality welds.
• Primarily weld nozzles, internal, and external components to assist in the complete fabrication of a coded pressure vessel
• Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools
• Works with different types and sizes of vessel materials
• Operates cutting torch, welding machine, grinders and arc gouging equipment
• Safely operates grinders, overhead cranes, rigging, welding machine, and various pneumatic hand tools
• Assembly of components with some fabrication of equipment needed for the job with minimal supervision
• Promotes and supports safety, production and positive attitude.
• Also fabricates and/or assembles guards, platforms, and any other structure required
For more information, please call (337) 566-8888 Monday - Friday, 7:30AM - 4:30PM CT.
Mailing address:
Delta Compression and Equipment
160 James Lane
Krotz Springs, LA 70750